Hitachi GX1000-SMC013X, Instruction Manual

Page: 120 / 452

120
advance access-list resequence
Re-specifies the sequence numbers that determine the order in which the Advance filter
applies filter conditions.
Input format
To set or change information:
advance access-list resequence
<access list name>
[
<starting sequence>
[
<increment sequence>
]]
Input mode
(config)
Parameters
<access list name>
Specifies the identifier of the Advance filter that is to be set.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a name of no more than 31 characters.
For details, see 6.3 Specifiable values for parameters.
<starting sequence>
Specifies the starting sequence number.
1. Default value when this parameter is omitted:
The initial value is 10.
2. Range of values:
Specify 1 to 4,294,967,294 (in decimal).
<increment sequence>
Specifies the increment value for the sequence.
1. Default value when this parameter is omitted:
The initial value is 10.
2. Range of values:
Specify 1 to 100 (in decimal).
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None