Hitachi GX1000-SMC013X, Instruction Manual

Page: 80 / 452

80
4.7 Inserting and removing memory cards
To use a memory card, install it in a control and switching unit.
CAUTION
When moving the Device, remove memory cards. Excessive stress applied on the
memory card during transfer might damage the connector part of the memory card
slot.
(1) Inserting an SFP
Hold the memory card with the cut-off corner on the right. Insert it into the device until you
hear a click, and then release your finger slowly.
Figure 4-9 Inserting the memory card
(1) Memory card
(2) Memory card slot
CAUTION
When inserting a memory card, do not push the card too strongly or flick it with your
finger.
Doing so might damage the connector of the memory card slot.
NOTE
To avoid deleting and writing data, slide the protection switch to Lock.
NOTE
Before installing a memory card, remove any dust in and around the memory card slot
with a dry cloth.