228
19.5 Updating files
This section describes how to update SP files.
19.5.1 How to update the files
1.
Prepare an FTP server, and then save the files to be updated on the server.
Example of a file to update:
NXSC0312.1279
2
.
Add the server to the SP configuration and the CSU configuration so that the FTP
server is accessible from the update-target SP interface specified by using the CSU
configuration command
SP-port
and its subordinate command
peer-control
.
3
.
In the CSU terminal, go from CSU administrator mode to administrator mode for the
SP to be updated.
4
.
Use the
update
command to specify the files to be updated and then update the SP.
Display example (
ftp
command):
(
SP name
)# update ftp://[email protected]/SP/RELEASE/NXSC0312.1279
[update] Using /dev/sda1 for update
importing file ftp://[email protected]/SP/RELEASE/NXSC0312.1279
Password:
Upgrade start.
Upgrade complete, you need to restart this card.
5
.
Use the
show version
command to check whether the update was applied to
Startup ver
.
Display example:
(
SP name
)
# show version
Date 2011/01/12 01:24:04
F/W:
Current : Startup
Active ver. 1.0 build_1176
Startup ver. 1.2 build_1279
Backup ver. 1.0 build_1176
H/W:
BOOT [11.44]
MISC [1.0]
SPCT [0.34]
6.
Go from SP administrator mode to CSU administrator mode.
7.
Execute the
inactivate nif
and
activate nif
commands for the SP to restart it.
8.
After the SP starts, go from CSU administrator mode to administrator mode for the
SP to be updated.
9.
Use the
show version
command to check whether the update was applied to
Startup ver
.
Display example:
(
SP name
)# show version
Date 2010/01/12 01:35:07
F/W:
Current : Startup
Active ver. 1.2 build_1279
Startup ver. 1.2 build_1279
Backup ver. 1.0 build_1176
Update version number
Summary of Contents for GX1000-SMC013X
