©
HDG Bavaria GmbH 07/2008
HDG Compact 99 - 200 - Version 1 - en
7 Cleaning and servicing the heating system – Procedure
141
C
HECKING
AND
CLEANING
THE
ASH
REMOVAL
SYSTEM
HDG C
OMPACT
99 - 115
1.
Switch the heating system off.
✎
See the chapter entitled “6 Using the heating system”, section “6.3
Switching off the heating system”.
2.
Allow the fire in the heating system to burn out and cool down.
3.
Remove the ash containers.
✎
See section “Checking and emptying the ash container” in this
chapter.
4.
Unscrew the star-grip screws and remove the ash removal system
doors (2, 4) for the ash and fly ash chamber towards the front.
5.
Check the ash chamber (1) and the fly ash chamber (3) for foreign
bodies, encrustations and clumps of ash and remove these if ne-
cessary using a cleaning utensil (e.g. a scraper, included in deli-
very, or a vacuum cleaner).
6.
Mount the components in the reverse sequence.
7.
Switch the heating system on again.
✎
See the chapter entitled “6 Using the heating system”, section “6.2
Switching on the heating system”.
✓
The inspection and cleaning of the ash removal system is com-
pleted.
Important!
✎
See “Generally applicable safety instructions” in this section.
Figure 7/21 - Inspecting and cleaning the C100/105 ash removal system
2
1
4
3
Next time you switch on the heating system it is possible that
smoke may be emitted into the ash container. For this reason, en-
sure that the ash containers are roughly half full following cleaning
of the automatic ash removal system.
