HDG Compact 100, User Manual

Page: 153 / 164

©
HDG Bavaria GmbH 07/2008 HDG Compact 99 - 200 - Version 1 - en
8 Troubleshooting – Possible faults
153
FA085 Moving floor
motor protec-
tion triggered
• Motor incorrectly connected
• Motor overload
• Motor is faulty
• Motor cable faulty
• Check the motor connection
• Check the drive
• Check the motor
• Check the motor cable
• Press the Acknowledge fault
key
FA086 Moving floor
fuel bunker door
end switch
• Fuel bunker door was ope-
ned
•
Faulty limit switch
• Connection cable faulty
• Close the door
• Check limit switch
•
Check the cable
• Press the Acknowledge fault
key
FA087 Moving floor
hydraulic unit
pressure switch
defective
• Pressure switch faulty • Check pressure switch and
replace if necessary
•
Press the Acknowledge fault
key
WA193 Boiler tempera-
ture sensor
faulty
• Supply sensor faulty
• Line faulty
• Analogue module faulty
• Check supply temperature
sensor
• Check the electrical connec-
tion
• Replace analogue module
WA194 Return line sen-
sor faulty
• Return line sensor faulty
•
Line faulty
• Analogue module faulty
• Check return line sensor
•
Check the electrical connec-
tion
• Replace analogue module
WA195 Buffer probe top
faulty
• Buffer probe faulty
• Line faulty
•
Analogue module faulty
• Check buffer probe
• Check the electrical connec-
tion
• Replace analogue module
WA196 Buffer probe
centre faulty
• Buffer probe faulty
•
Line faulty
• Analogue module faulty
• Check buffer probe
•
Check the electrical connec-
tion
•
Replace analogue module
WA197 Buffer probe
bottom faulty
• Buffer probe faulty
• Line faulty
•
Analogue module faulty
• Check buffer probe
• Check the electrical connec-
tion
• Replace analogue module
WA208 Replace buffer
battery
•
Memory battery of control
unit discharged
•
Replace memory battery
WA209 Cleaning system
faulty
• Motor incorrectly connected
•
Motor overload
• Motor is faulty
• Motor cable faulty
•
Faulty limit switch
• Check the motor connection
•
Check the drive
• Check the motor
• Check the motor cable
•
Check limit switch
No. Fault Cause Remedy
Table 8/1 - Faults (continuation)