©
HDG Bavaria GmbH 07/2008
HDG Compact 99 - 200 - Version 1 - en
2 Safety instructions – Intended use
11
2 Safety instructions
2.1 Intended use
B
ASIC
SYSTEM
DESIGN
PRINCIPLES
B
ASIC
PRINCIPLES
The heating system was built using state-of-the-art technology and
conforms to recognised safety regulations. Nevertheless, there is still
a risk of injury or death to users or bystanders, and of adverse effects
upon the heating system or upon other material goods.
Have your specialist heating company provide you with detailed ins-
tructions on the operation of the heating system.
U
SING
THE
HEATING
SYSTEM
Only use the heating system when it is in perfect condition. Use it
properly, as intended, be aware of safety and hazards, and observe
the Operating manual. Have any faults which could impair safety
fixed immediately.
B
ASIC
PRINCIPLES
ON
THE
CONTENT
OF
THE
OPERATING
MANUAL
S
COPE
The content of this operating manual is intended exclusively for the
planning, installation and operation of the HDG Compact 99 -
200heating systems. Any further implementation of applicable stan-
dards, for example with regard to the installation of the heating
system (pipework, etc.) is not part of this operating manual. HDG Ba-
varia does not assume any liability for this.
P
ROPER
AND
IMPROPER
MANNER
OF
OPERATION
P
URPOSE
OF
THE
HEATING
SYSTEM
The HDG Compact 99 - 200 heating system is designed for the stan-
dard use of burning wood fuel products made from untreated wood
in the form of wood chips, shavings and pellets for the purpose of
warm water heating.
Any other application is considered improper use. The manufacturer
will accept no liability for any damage resulting from improper use.
The operator bears sole responsibility in such cases.
Proper use includes adherence to the installation, operation and
maintenance requirements specified by the manufacturer.
Modification of the specified operating values will affect the heating
system's control program and could lead to malfunctions. Only
trained maintenance and operating personnel may undertake modi-
fications to the operating values.
The use of materials with other technical burning characteristics re-
quires comprehensive modification of the control parameters by
qualified specialists.
