1/3/05
888-2517-001
2-41
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation & Setup
eCDi ™
STEP 35
For information on setting up the Meterlog and the Performance
Monitoring alarms, see
•
"3.4.1.2 Meter Log" on page 3-7
•
"3.6.2 Performance Faults Screen" on page 3-20.
Figure 2-32 Meterlog and Performance Monitoring Configuration Screens
2.8.2
Apply Changes
Once all of the Configuration
information is entered on the
individual screens, you must click on
“Apply.” to actually send the changes
to the eCDi™ . The Apply button is on
the Main Configuration menu shown
in Figure 2-33. As stated previously,
this will also cause test emails and
SNMP trap messages to be sent to all
entered addresses.
Figure 2-33 Main Configuration
Menu Screen
Summary of Contents for eCDi
Page 4: ...MRH 2 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 6: ...vi 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 8: ...viii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 12: ...xii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
