Harris eCDi, Technical Manual

Page: 144 / 190

B-8 888-2517-001 1/3/05
WARNING: Disconnect primary power prior to servicing.
eCDi ™
Appendix B DiamondCD Fault and
pa CAB#MOD#MAGNITUDE I/Q vector magnitude in module # of PA cabinet #.
Not on GUI. No unit of measure. Cnt
pa CAB#MOD#FREQUENCY RF channel frequency of module # of PA cabinet #. MHz
pa CAB#MOD#REJECTPWR Reject power of module # of PA cabinet #. %
pa CAB#MOD#PHASECORR Phase correction voltage applied by cabinet
controller of cabinet # to module #. mV
Output Meters
out OUTREFLECTIONFACTOR Factor reflPwr/fwdPwr in dB/10 (formula: dB/10 =
100 * log (outReflectedPower/
outForwardPower))Attention: result is a negative
number cB
out FORWARDPOWERVOLTS Control Cabinet forward power detector output mV
out REFLECTEDPOWERVOLTS Control Cabinet reflected power detector output mV
out FORWARDPOWER Total System forward power output mW
out REFLECTEDPOWER Total system reflected power output mW
out REJECTLOAD#POWER Power reading for Cabinet combiner reject load # %
out CAB#POWERBALANCE Cabinet # power balance. Indicates gain setting of
the modules in this cabinet. Raw reading, no units. Cnt
out CAB#FORWARDPOWER Forward power reading for PA Cabinet # W
out CAB#REFLECTEDPOWER Reflected power reading for PA Cabinet # W
Drive Meters
drv DRV#RFSAMPLE Forward power reading for Driver # mW
drv DRV#CURRENT Current reading for Driver # mA
drv DRV#TEMPERATURE Temperature reading for Driver # C
drv DRV#PSSAMPLE +28Vdc Driver # PS Sample mV
drv DRVPOWERVOLTS Control Cabinet Drive output detector voltage mV
drv DRVPOWER Control Cabinet Drive output power mW
drv EXCITERFOLDBACKLEVEL Foldback control line voltage level. Value of 1023 =
4.8V (approx).
mV
drv CAB#INPUTPOWER “Input drive power reading in PA cabinet # mW
Table B-6 Diamond Meter Log Reference (all meters included)
Group Meter Log Name Description Units