Harris eCDi, Technical Manual

Page: 177 / 190

1/3/05 888-2517-001 F-5
WARNING: Disconnect primary power prior to servicing.
Appendix F Platinum Z Fault and Meter Log Reference
eCDi ™
pa PASUMWARNING Pa sum warning
pa Z#1OUTFAULT “Z-Plane-# (# = A,B,C or D) PA1 out fault.Enum: 0=Ok,1=Fault”
pa Z#1OVERCURRFAULT “Z-Plane-# (# = A,B,C or D) PA1 over current fault.Enum:
0=Ok,1=Fault”
pa Z#1OVERTEMPFAULT “Z-Plane-# (# = A,B,C or D) PA1 over temperature fault.Enum:
0=Ok,1=Fault”
pa Z#1SUMFAULT Z-Plane-# (# = A,B,C or D) module 1 pa sum fault
pa Z#2OUTFAULT “Z-Plane-# (# = A,B,C or D) PA2 out fault.Enum: 0=Ok,1=Fault”
pa Z#2OVERCURRFAULT “Z-Plane-# (# = A,B,C or D) PA2 over current fault.Enum:
0=Ok,1=Fault”
pa Z#2OVERTEMPFAULT “Z-Plane-# (# = A,B,C or D) PA2 over temperature fault.Enum:
0=Ok,1=Fault”
pa Z#2SUMFAULT Z-Plane-# (# = A,B,C or D) module 2 pa sum fault
pa Z#3OUTFAULT “Z-Plane-# (# = A,B,C or D) PA3 out fault.Enum: 0=Ok,1=Fault”
pa Z#3OVERCURRFAULT “Z-Plane-# (# = A,B,C or D) PA3 over current fault.Enum:
0=Ok,1=Fault”
pa Z#3OVERTEMPFAULT “Z-Plane-# (# = A,B,C or D) PA3 over temperature fault.Enum:
0=Ok,1=Fault”
pa Z#3SUMFAULT Z-Plane-# (# = A,B,C or D) module 3 pa sum fault
pa Z#4OUTFAULT “Z-Plane-# (# = A,B,C or D) PA4 out fault.Enum: 0=Ok,1=Fault”
pa Z#4OVERCURRFAULT “Z-Plane-# (# = A,B,C or D) PA4 over current fault.Enum:
0=Ok,1=Fault”
pa Z#4OVERTEMPFAULT “Z-Plane-# (# = A,B,C or D) PA4 over temperature fault.Enum:
0=Ok,1=Fault”
pa Z#4SUMFAULT Z-Plane-# (# = A,B,C or D) module 4 pa sum fault
pa Z#5OUTFAULT “Z-Plane-# (# = A,B,C or D) PA5 out fault.Enum: 0=Ok,1=Fault”
pa Z#5OVERCURRFAULT “Z-Plane-# (# = A,B,C or D) PA5 over current fault.Enum:
0=Ok,1=Fault”
pa Z#5OVERTEMPFAULT “Z-Plane-# (# = A,B,C or D) PA5 over temperature fault.Enum:
0=Ok,1=Fault”
pa Z#5SUMFAULT Z-Plane-# (# = A,B,C or D) module 5 pa sum fault
pa Z#6OUTFAULT “Z-Plane-# (# = A,B,C or D) PA6 out fault.Enum: 0=Ok,1=Fault”
pa Z#6OVERCURRFAULT “Z-Plane-# (# = A,B,C or D) PA6 over current fault.Enum:
0=Ok,1=Fault”
pa Z#6OVERTEMPFAULT “Z-Plane-# (# = A,B,C or D) PA6 over temperature fault.Enum:
0=Ok,1=Fault”
pa Z#6SUMFAULT Z-Plane-# (# = A,B,C or D) module 6 pa sum fault
pa Z#7OUTFAULT “Z-Plane-# (# = A,B,C or D) PA7 out fault.Enum: 0=Ok,1=Fault”
Table F-3 Platinum Z Power Amplifier Faults
Group Fault Log Name Fault Description