Harris eCDi, Technical Manual

Page: 143 / 190

1/3/05 888-2517-001 B-7
WARNING: Disconnect primary power prior to servicing.
Appendix B DiamondCD Fault and
eCDi ™
B.3 Meter Log Reference
Table B-6 Diamond Meter Log Reference (all meters included)
Group Meter Log Name Description Units
System Meters
sys FREQUENCY “Transmitter frequency, in MHz.” MHz
Power Supply Meters
ps CAB#PSCURRENT mA
ps FASTACSAMPLE Sample of AC power coming into low-voltage power
supply assembly. Result is in AC volts. V
ps CAB#PHASE Cabinet phase voltage mV
Power Amplifier Meters
pa CAB#MOD#CURRENT mA
pa CAB#MOD#IVECTOR I-Vector of module # of PA cabinet #. Called DAC1
on module screen of GUI. No unit of measure. Cnt
pa CAB#MOD#QVECTOR Q-Vector of module # of PA cabinet #. Called DAC2
on module screen of GUI. No unit of measure. Cnt
pa CAB#MOD#PSVOLTAGE RF power supply voltage measured before the pass-
FET in module # of PA cabinet #. mV
pa CAB#MOD#FETVOLTAGE RF power supply voltage measured after the pass-
FET in module # of PA cabinet #. mV
pa CAB#MOD#DRIVERCURR Current in the Driver pallet of module # of PA
cabinet #. mA
pa CAB#MOD#PAL1CURRENT Current supplied to pallet 1 of module # of cabinet #. mA
pa CAB#MOD#PAL2CURRENT Current supplied to pallet 2 of module # of cabinet #. mA
pa CAB#MOD#PAL3CURRENT Current supplied to pallet 3 of module # of cabinet #. mA
pa CAB#MOD#PAL4CURRENT Current supplied to pallet 4 of module # of cabinet #. mA
pa CAB#MOD#PAL5CURRENT Current supplied to pallet 5 of module # of cabinet #. mA
pa CAB#MOD#PAL6CURRENT Current supplied to pallet 6 of module # of cabinet #. mA
pa CAB#MOD#INPUTPOWER Input power to module # of PA cabinet #. mW
pa CAB#MOD#OUTPUTPWR Output power of module # of PA cabinet #. W
pa CAB#MOD#REFLECTPWR Reflected power of module # of PA cabinet #. W
pa CAB#MOD#HEATSNKTEMP Heatsink temperature of module # of PA cabinet #. C
pa CAB#MOD#PHASEOFFSET Phase offset of module # of PA cabinet #. Called PH
Pre on module screen of GUI. No unit of measure. Cnt
pa CAB#MOD#PHASE Phase of module # of PA cabinet #. Called Phase on
module screen of GUI. No unit of measure. Cnt