1-2
888-2517-001
1/3/05
WARNING: Disconnect primary power prior to servicing.
eCDi ™
Section 1 Introduction
1.2
eCDi™ and the PowerCD™ Transmitter
For the Harris PowerCD Digital UHF Transmitter, the eCDi™ has been modified to
include a local GUI touchscreen interface in addition to its normal networking
capabilities. In the PowerCD transmitter the eCDi™ is the local transmitter control
interface using the attached 12" VGA touchscreen and has been renamed the "Display
Unit." This means that the eCDi™ provides both local and remote control for the
PowerCD transmitter.
The PowerCD transmitter will have a Display Unit (an eCDi™ ) in the Driver Cabinet
for system control and monitoring and one in each PA cabinet for individual cabinet
control and monitoring.
Information in this manual covers the basic setup and operation of the remote
networking side of the Display Unit (eCDi™ ). Operation of the Local GUI screens,
mounted on the front of the transmitter Display Units, is covered in the PowerCD
Transmitter Operators manual 888-2574-001.
Also note that the PowerCD Display Unit (eCDi™ ) is a 2 rack unit high box (standard
eCDi™ is 1 rack unit) but uses the same software as all other eCDi™ units.
Figure 1-1 PowerCD™ Display Unit (modified eCDi™ )
PowerCD Display Unit (modified eCDi™ )
Local Transmitter touchscreen
display. Detailed operation of
these screens is covered in the
PowerCD Transmitter Operators
Manual 888-2574-001.
PowerCD
Driver
Cabinet
Summary of Contents for eCDi
Page 4: ...MRH 2 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 6: ...vi 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 8: ...viii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 12: ...xii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
