1/3/05
888-2517-001
B-1
WARNING: Disconnect primary power prior to servicing.
eCDi ™
Appendix B
DiamondCD Fault and
Meter Log Reference
B.1
Introduction
For the DiamondCD transmitter, all data in the transmitter is either displayed via the
GUI, lights an LED or is sent to the parallel remote control ports. Some of the fault
reporting is done in the form of highlighting a button red, such as most summary faults,
but this fault will not usually show in a fault log on the transmitter GUI. However, when
the data is sent out a serial port to a device such as the eCDi™ the only way to represent
a fault is through a name. The same issue applies to Metering data. Therefore, this
section is divided into 2 parts:
•
Fault Log Reference
•
Metering Log Reference
The Fault Log Reference is a group of tables that list all of the faults that can be
reported and logged on the eCDi™ for a DiamondCD transmitter. The faults are divided
into 5 tables by category:
•
Table B-1, “Diamond System Faults,” on page B-2
•
Table B-2, “Diamond Power Supply Faults,” on page B-3
•
Table B-3, “Diamond PA Faults,” on page B-4
•
Table B-4, “Diamond Output Faults,” on page B-5
•
Table B-5, “Diamond RF Drive Faults,” on page B-6
The Metering Log Reference is a table that lists all of the Meter readings that can be
logged on the eCDi™ for a DiamondCD transmitter:
•
Table B-6, “Diamond Meter Log Reference (all meters included),” on
page B-7.
Summary of Contents for eCDi
Page 4: ...MRH 2 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 6: ...vi 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 8: ...viii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 12: ...xii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
