6-4
888-2517-001
1/3/05
WARNING: Disconnect primary power prior to servicing.
eCDi ™
Section 6 SNMP Connectivity
The following devices are supported by the Harris Base MIB:
a.
TCM 8600
terrestrial central monitor
b.
DTV 660
digital TV transmitter
c.
DAB 665
digital radio
d.
TVS660-D
analog TV transmitter
e.
eCDi
; which supports the following transmitters:
1.
Sigma CD IOT Transmitter
2.
DiamondCD UHF DTV Transmitter
3.
PlatinumCD and Platinum Analog VHF Transmitters
4.
Ranger UHF DTV Transmitter
5.
Platinum Z FM and Platinum Z IBOC Transmitters
6.
Atlas Digital DVB-T and Atlas Analog Transmitters
7.
PowerCD™ UHF DTV Transmitter
6.4.1
MIB Functionality
Monitoring:
Main keys of the MIB 2 are supported (e.g. name, location), to classify the device. The
Harris specific MIB allows monitoring of the main values of the device (e.g. Error,
Warning, Output present) via SNMP.
Control:
Only rudimentary commands are included in the Harris MIB (e.g. switch transmitter on/
off). For security, the device control via SNMP has to be activated in the equipment.
Traps:
The user can setup remote alarming via SNMP traps. Depending on the setup, the
device will send a trap if an error, warning or info appears or disappears in the device.
6.4.2
Supported MIBs
MIB2:Standard for all SNMP devices.(RFC1213-MIB)
Harris transmitter base MIB: basic functionality for all Harris transmitters
Summary of Contents for eCDi
Page 4: ...MRH 2 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 6: ...vi 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 8: ...viii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 12: ...xii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
