Harris eCDi, Technical Manual

Page: 140 / 190

B-4 888-2517-001 1/3/05
WARNING: Disconnect primary power prior to servicing.
eCDi ™
Appendix B DiamondCD Fault and
Table B-3 Diamond PA Faults
Group Fault Log Name Description
pa CAB#MOD#SUMFAULT There is a fault in PA Module # of PA Cabinet #
pa CAB#PASUMFAULT There is a PA fault somewhere in PA Cabinet #
pa PASUMFAULT Status of the front panel F2 Power Amp LED Active low
pa PASUMWARN PA summary warning
pa CAB#MOD#FREQFAULT Indicates that the reported frequency
(cab#Mod#Frequency) of module # of PA cabinet # does
not match the reported frequency band (cab#Mod#Band).
pa CAB#MOD#OFFFAULT Indicates that module # of PA cabinet # is OFF when it
should be ON.
pa CAB#MOD#CANCOMFLT Indicates that the Main Controller has lost communication
with module # of PA cabinet #.
pa CAB#MOD#POSFLT Indicates that module # of PA cabinet # is not fully
plugged into the cabinet.
pa CAB#MOD#EEPROMFAIL Indicates that module # of PA cabinet # was unable to
write to the EEPROM on the module controller.
pa CAB#MOD#FAILURE12V Indicates a 12V failure in module # of PA cabinet #.
pa CAB#MOD#VSWRFAULT Indicates that the VSWR level in module # of PA cabinet #
is too high.
pa CAB#MOD#AGCUNLKFLT Indicates that the AGC circuit in module # of PA cabinet #
is unlocked.
pa CAB#MOD#REFFLT Indicates that the reference voltage in module # of PA
cabinet # is out of tolerance.
pa CAB#MOD#INPUTLOW Indicates low RF input to module # of PA cabinet #.
pa CAB#MOD#OVERDRIVE Indicates that module # of PA cabinet # has detected too
much RF drive power.
pa CAB#MOD#OVERTEMP Indicates that module # of PA cabinet # has passed its
heatsink temperature limit.
pa CAB#MOD#OVERCURR Indicates that module # of PA cabinet # has drawn too
much current.
pa CAB#MOD#UNDERVOLTS Indicates that the RF power supply voltage in module # of
PA cabinet # is too low.
pa CAB#MOD#OVERVOLTS Indicates that the RF power supply voltage in module # of
PA cabinet # is too high.
pa CAB#MOD#DRVOVERCURR Indicates that the driver pallet of module # of PA cabinet #
is drawing too much current.
pa CAB#MOD#PAL6OVERCUR Indicates that pallet 6 of module # of PA cabinet # is
drawing too much current.
pa CAB#MOD#PAL5OVERCUR Indicates that pallet 5 of module # of PA cabinet # is
drawing too much current.