3-8
888-2517-001
1/3/05
WARNING: Disconnect primary power prior to servicing.
eCDi ™
Section 3 Operation
3.4.1.2.1 Configuring the Meter Log
The Meter Logging configuration screen is shown in Figure 3-5. This is accessed via
the Browser Menus by pressing “Service eCDi
?
Configuration
?
Meter Logging.
Figure 3-5 Browser Menu
?
Service eCDi
?
Configuration
?
Meter Logging
The screen contains a list of all available meter readings, along with the current settings
for each reading. The example in Figure 3-6 shows that the meter reading
“OUTFORWARDPOWER” is enabled for logging (Log - Yes), a reading will be taken
and stored once every minute, and the graph in the Meter Log screen will have a range
of 20000 (Limit Lo) to 27000 watts (Limit Hi).
Figure 3-6 Meter List and Status
Meter Select
pull-down
Menu
Meter Log
Enable
checkbox
Default
Settings
Checkbox
Unit of
Measure
pull-down
menu
Lower and Upper limit settings
for graphing in Meter Log
Meter list with
settings status
NOTE: The information in this box cannot be edited directly. Use the
edit functions below this window and press submit to make changes.
Summary of Contents for eCDi
Page 4: ...MRH 2 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 6: ...vi 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 8: ...viii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 12: ...xii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
