Harris eCDi, Technical Manual

Page: 129 / 190

1/3/05 888-2517-001 A-5
WARNING: Disconnect primary power prior to servicing.
Appendix A SigmaCD Fault and Meter
eCDi ™
Table A-5 SigmaCD Diamond Drive IPA Faults
Group Fault Log
Entry
Description
drv CAB1MODULEOFFFAULT Indicates that module of PA cabinet 1 is OFF when it should
be ON.
drv CAB1MODULEFREQFAULT Indicates that the reported frequency (cab1Mod2Frequency)
of module of PA cabinet 1 does not match the reported
frequency band (cab1Mod2Band).
drv CAB1FAILURE12V Indicates a 12V failure in module of PA cabinet 1.
drv CAB1VSWRFAULT Indicates that the VSWR level in module of PA cabinet 1 is
too high.
drv CAB1MODULEPOSFAULT Indicates that module of PA cabinet 1 is not fully plugged
into the cabinet.
drv CAB1EEPROMFAIL Indicates that module of PA cabinet 1 was unable to write to
the EEPROM on the module controller.
drv CAB1MODULECANCOMFLT Indicates that the Main Controller has lost communication
with module of PA cabinet 1.
drv CAB1MODULEOVERTEMP Indicates that module of PA cabinet 1 has passed its heatsink
temperature limit.
drv CAB1REFERENCEFAULT Indicates that the reference voltage in module of PA cabinet
1 is out of tolerance.
drv CAB1AGCUNLOCKFAULT Indicates that the AGC circuit in module of PA cabinet 1 is
unlocked.
drv CAB1MODULEOVERVOLT Indicates that the RF power supply voltage in module of PA
cabinet 1 is too high.
drv CAB1MODULEUNDERVOLT Indicates that the RF power supply voltage in module of PA
cabinet 1 is too low.
drv CAB1MODULEOVERDRIVE Indicates that module of PA cabinet 1 has detected too much
RF drive power.
drv CAB1MODULEOVERCURR Indicates that module of PA cabinet 1 has drawn too much
current.
drv CAB1MODULEINPUTLOW Indicates low RF input to module of PA cabinet 1.
drv CAB1PALLET4OVERCURR Indicates that pallet 4 of module of PA cabinet 1 is drawing
too much current.
drv CAB1PALLET5OVERCURR Indicates that pallet 5 of module of PA cabinet 1 is drawing
too much current.
drv CAB1PALLET6OVERCURR Indicates that pallet 6 of module of PA cabinet 1 is drawing
too much current.
drv CAB1PALLET3OVERCURR Indicates that pallet 3 of module of PA cabinet 1 is drawing
too much current.