1/3/05
888-2517-001
3-13
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
eCDi ™
3.5.1
Title Bar
Contains the system name and location, system power meter, connection status (online
or offline) and a Logout button. The name, Cincinnati in this example, is set in the
General configuration window as “Location” under the browser menu Service eCDi
?
Configure (see Figure 2-22 on page 2-31).
Figure 3-11 Web GUI Title Bar
3.5.2
Control Interface
This box (shown in Figure 3-12) will contain all of the transmitter and system controls
such as Tx (transmitter), Mode (for transmitters with a mode controller) and Cabs
(cabinets) for transmitters with controls on the individual PA cabinets. Other tabs may
be available depending on the transmitter.
NOTE:
There can be up to a few seconds of delay between the time that a control button
is pressed and the status light comes on. The eCDi™ will not light the status
button (such as Beam ON below) until it gets the status back from the transmitter.
Figure 3-12 Control Interface Tabs
Transmitter
Mode
Cabinet
Select
Control
System
Control
Summary of Contents for eCDi
Page 4: ...MRH 2 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 6: ...vi 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 8: ...viii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
Page 12: ...xii 888 2517 001 1 3 05 WARNING Disconnect primary power prior to servicing...
