PAMS Technical Documentation
NPM–9 Series Transceivers
Issue 1 02/2002
Nokia Corporation
Disassembly Instructions
Page 1: ...PAMS Technical Documentation NPM 9 Series Transceivers Issue 1 02 2002 Nokia Corporation Disassembly Instructions ...
Page 2: ...NPM 9 Disassembly Instructions PAMS Technical Documentation Page 2 Issue 1 02 2002 Nokia Corporation CONTENTS Disassembly of NPM 9 3 ...
Page 3: ...r and B Cover apart to open the unit Remove thesix screws with screwdriver Torx T6 in the shown order When assembling the reverse order has to be taken with a torque of 17Ncm Before removing the UI module LU9 this clip has to be released with a screwdriver or tweezers Now the UI modulecan be removed Pleasetake care not to damage the board to board connector afterwards which is located on the CMT m...
Page 4: ...ra Motor and Microphone which can be easily pushed out of the System Connector Grab the Keymatand remove it It is always good to protect the windowalso from the inner side If you needto remove or change the SIM CardCover you first have to release it The second step is to push one hinge to the middle to lift up the Card Cover New screws have a special locking compound on the thread Never take used ...
