NPM–9
Disassembly Instructions
PAMS Technical Documentation
Page 3
Issue 1 02/2002
Nokia Corporation
Disassembly of NPM–9
1.
DISASSEMBLY INSTRUCTIONS
Attention
: Before starting this procedure you must take care of ESD precautions like being in your
ESD–
area and connecting your arm wrist.
Push the unlock–button and move
the battery
cover
in direction to the System Connector.
Pull the A–Cover and B–Cover apart to open the unit.
Remove the six screws with screwdriver Torx T6 in
the shown
order.
When
assembling
the
reverse
order has to be taken with a torque of 17Ncm.
Before
removing the UI module LU9 this clip has
to be released with a screwdriver or tweezers.
Now the
UI
module can be
removed.
Please take care
not to
damage
the board to board
connector
afterwards which is located on the CMT module.
Lift up the CMT module LA5 carefully. Sometimes
it
happens that
the
battery connector gets stuck
at the
SIM
Card
Cover.
Take
care not to bend the
spring
contacts of
the
battery connector.
