49 ENGLISH
Protocol Setting
3.
Choose the protocols you just added to validate the connection of the network camera.
2.3.4 Editing the IP Cameras Connected to the PoE Interfaces
This chapter is only applicable for the following models: GD-RN-AP8616P, GD-RN-AP8632P, GD-RN-AC2416P
and GD-RN-AC2004P.
The <PoE> interface enables the NVR system to pass electrical power safely along with data on
Ethernet cabling to the connected network cameras.
Up to 4 network cameras can be connected to 4-Port models, 8 network cameras to 8-Port models, and
16 network cameras to 16-Port models. If you disable the PoE interface, you can also connect to the
online network cameras. And the PoE interface supports the Plug-and-Play function.
Example:
For GD-RN-AP8616P, if you want to connect 6 network cameras via PoE interfaces and 2 online
cameras, you must disable 10 PoE interfaces in the Edit IP Camera menu.
To add Cameras for NVR supporting the <PoE> function:
Before you start:
Connect the network cameras via the <PoE> interfaces.
Steps:
1.
Enter the <Camera Management> interface: Menu> Camera> Camera
