124 ENGLISH
Note:
The <Alarm> signal will be transmitted automatically in the <Detection> mode when a remote <Alarm
Host> is configured. Please refer to
Chapter 11.2.6 Configuring More Settings
for details of <Alarm
Host> configuration.
<Email Linkage>:
Send an email with <Alarm> information to a user or users when an <Alarm> is detected.
Please refer to
Chapter
11.2.8 Configuring Email
for details of <Email> configuration.
<Trigger Alarm Output>:
Trigger an <Alarm Output> when an alarm is triggered.
Steps:
1.
Enter the <Alarm Output> interface: Menu> Configuration> Alarm> Alarm Output
2.
Select an <Alarm Output> and set an <Alarm Name> and a <Dwell Time>. Click the <Schedule>
button to set the <Arming Schedule> of the <Alarm Output>.
Note:
If <Manually Clear> is selected in the dropdown list for the <Dwell Time>, you can clear it only by going to
Menu> Manual> Alarm.
Alarm Output Setup Interface
3.
Set up the <Arming schedule> of the <Alarm Output>.
Choose one day of a week and up to 8 time periods can be set within each day.
Note:
Time periods shall not be repeated or overlapped.
