166 ENGLISH
4.
Click the <Test> button to start testing the <Network Delay> and the <Packet Loss>. The testing
result pops up on the window. If the testing failed, the error message box will pop up as well. Refer
to the figure below.
Testing Result of Network Delay and Packet Loss
12.4.2 Exporting the Network Packet
By connecting the NVR to a network, the captured <Network Data Packet> can be exported to a USB-
flash disk, a SATA /eSATA, a DVD-R/W and other local backup devices.
Steps:
1.
Enter the <Network Traffic> interface: Menu> Maintenance> Net Detect
2.
Click the <Network Detection> tab to enter the <Network Detection> interface.
3.
Select the backup device from the dropdown list called <Device Name> as show below.
Note:
Click the <Refresh> button if the connected local backup device cannot be displayed. When it fails to detect
the backup device, please check whether it is compatible with the NVR. You can format the backup device if
the format is incorrect.
Export Network Packet
4.
Click the <Export> button to start exporting.
5.
After the exporting is complete, click <OK> to finish the <Packet Export> as shown below.
Packet Export Attention
Note:
Up to 1M data can be exported each time.
