174 ENGLISH
14. HDD Management
14.1 Initializing HDDs
A newly installed hard disk drive (HDD) must be initialized before it can be used with your NVR.
Note:
A message box pops up when the NVR starts up if there exits any <Uninitialized HDD>.
Message Box of Uninitialized HDD
Click the <Yes> button to initialize it immediately or you can perform the following steps to initialize the
HDD.
Steps:
1.
Enter the <HDD Information> interface: Menu> HDD> General
HDD Information Interface
2.
Select the HDD that is to be initialized.
3.
Click the <Init> button.
Confirm Initialization
