151 ENGLISH
Note:
Two self-adaptive <10M/100M/1000M Network> interfaces for GD-RN-AT8864N and GD-CI-CT8832N
and the <Multi-address> and <Network Fault Tolerance> working modes are configurable.
One self-adaptive <10M/100M/1000M Network> interface for GD-RN-AC2416N, GD-RN-AC2416P, GD-
RN-AP8632P and GD-RN-AP8616P.
One self-adaptive <10M/100M Network> interface for GD-RN-AC2004P.
Four self-adaptive
<
10M/100M/1000M Network> interfaces for GD-RN-AT819128N and the <Multi-
address>, <Load Balance> and <Network Fault-tolerance> working modes are configurable.
For the GD-RN-AP8616P and GD-RN-AP8632P you need to configure the <Internal NIC Address> so that
<IP Addresses> are assigned to the cameras connected to the <PoE> interfaces.
4.
After having configured the general settings, click the <Apply> button to save the settings.
Working Mode
Two <10M/100M/1000M NIC> cards are provided and it allows the device to work in the <Multi-
address> and in the <Net-fault Tolerance> modes.
<Multi-address Mode>: The parameters of the two <NIC> cards can be configured independently. You
can select <LAN1> or <LAN2> in the <NIC Type> field for parameter settings.
You can select one <NIC> card as <Default Route>. Then the system will connect with the Extranet to
which the data will be forwarded through the <Default Route>.
<Net-fault Tolerance Mode>: The two <NIC> cards use the same <IP Address> and you can select the
<Main NIC> to <LAN1> or <LAN2>. By this way, in case of one <NIC> card failure, the device will
automatically enable the other standby <NIC> card so as to ensure the normal running of the whole
system.
12.2 Configuring Advanced Settings
12.2.1 Configuring DDNS
You can set the <Dynamic DNS (DDNS)> for network access.
Prior registration with your <ISP> is required before configuring the system to use <DDNS>.
Steps:
1.
Enter the <Network Settings> interface.
2.
Menu > Configuration > Network
3.
Select the <DDNS> tab to enter the <DDNS Settings> interface.
4.
Check the <DDNS> checkbox to enable this feature.
5.
Select <DDNS Type>. 4 different <DDNS> types are selectable: <IPServer> (not supported by GD-RN-
AT819128N), <DynDNS>, <PeanutHull>, <NO-IP>.
- <IPServer>:
Input the <Server Address> for the <IPServer>.
