130 ENGLISH
RS-232 Settings
Multicast Connection
When connecting the NVR and the <POS> machine via <Multicast> protocol, set the <Multicast
Address> and <Port>.
Multicast Settings
Sniff Connection
Connect the NVR and the <POS> machine via <Sniff>. Configure the <Source Address> and the
<Destination Address> settings.
Sniff Settings
6.
Set other parameters of <Character Overlay>.
1)
Select the <Character Encoding> format from the drop-down list.
2)
Select the <Overlay> mode of the characters to display in <Scrolling> or <Page mode.
3)
Select the <Font Size> to <Small>, <Medium> or <Large>.
4)
Set the <Overlay Time> of the characters. The value ranges from <5> to <3600> seconds.
Set the <Delay Time> of the <POS Event>. The value ranges from <5> to <3600> seconds. When
the device has not received the <POS Message> over the defined <Delay Time>, the transaction
is finished.
5)
(optional) Check the checkbox to <Enable the POS Overlay in Live View>. When this feature is
enabled, the <POS> information can be overlain on the <Live View> image.
