117 ENGLISH
8.2 Setting Sensor Alarms
Set the <Handling Action> of an <External Sensor Alarm>.
Steps:
1.
Enter <Alarm Settings> of the <System Configuration> and select an <Alarm Input>: Menu>
Configuration> Alarm
Select the <Alarm Input> tab to enter the <Alarm Input Settings> interface.
Alarm Status Interface of System Configuration
2.
Set up the <Handling Action> of the selected <Alarm Input>.
Check the <Enable> checkbox and click the <Settings> button to set up its <Alarm Response
Actions>.
Alarm Input Setup Interface
3.
(Optional) Enable <One-key Disarming> for <Alarm Input 1> (Local<-1).
1)
Check the checkbox of <Enable One-Key Disarming>.
2)
Click the <Settings> button to enter the <Linkage Action Settings> interface.
3)
Select the <Alarm Linkage Action(s)> you want to disarm for <Alarm Input 1>. The selected
<Linkage Actions> include the <Full Screen Monitoring>, <Audible Warning>, <Notify
Surveillance Center>, <Send Email> and <Trigger Alarm Output>.
Note:
When the
<Alarm Input 1>
(Local<-1) is enabled with <One-key Disarming>, the other <Alarm Input
Settings> are not configurable.
