148 ENGLISH
Steps:
1.
Enter the <Counting> interface: Menu> VCA Search> Counting
2.
Select the <Camera> for the people counting.
3.
Select the <Report Type> to <Daily Report>, <Weekly Report>, <Monthly Report> or <Annual
Report>.
4.
Set the statistics time.
5.
Click the
<Counting> button to start people counting statistics.
6.
You can click the <Export>
button to export the statistics report in excel format.
11.5 Heat Map
This function is not available in all models.
The <Heat Map> is a graphical representation of data represented by colors. The heat map function is
usually used to analyze the visit times and <Dwell Time> of customers in a configured area.
Note:
The <Heat Map> function must be supported by the connected IP Camera and the corresponding
configuration must be set.
Steps:
1.
Enter the <Heat Map> interface: Menu> VCA Search> Heat Map
2.
Select the <Camera> for the heat map processing.
3.
Select the <Report Type> to <Daily Report>, <Weekly Report>, <Monthly Report> or <Annual
Report>.
4.
Set the <Statistics Time>.
5.
Click the
<Counting> button to export the report data and start <Heat Map Statistics>; the results
are displayed in graphics marked in different colors.
Note:
As shown in the Picture above, a red color block (255, 0, 0) indicates the most welcome area and a blue color
block (0, 0, 255) indicates the less-popular area.
6.
You can click the
<Export>
button to export the statistics report in excel format.
11.6 Advanced Search
Note:
GD-RN-AP8616P, GD-RN-AP8632P, GD-RN-AT8864N and GD-RN-AT819128N support the <Advanced
Search> for a <Fire>/<Ship>/<Temperature>/<Temperature Difference Detection> triggered <Alarm>
and the recorded video files and pictures.
Before you start:
To get the <Smart Search Result>, the corresponding <Fire>/<Ship>/<Temperature>/ <Temperature
Difference> type must be enabled and configured on the connected thermal network camera
