140 ENGLISH
Note:
Up to 4 rules can be configured.
Draw Area for Intrusion Detection
8.
Click <Apply> to save the settings.
10.5 Region Entrance Detection
This function is not available in all models.
The <Region Entrance Detection> function detects people, vehicles or other objects which enter a pre-
defined virtual region from the outside place and certain actions can be taken when the alarm is
triggered.
Steps:
1.
Enter the <VCA Settings> interface: Menu> Camera> VCA
2.
Select the camera to configure the <VCA>.
You can click the checkbox of <Save VCA Picture> to save the captured pictures of <VCA Detection>.
3.
Select the <VCA Detection Type> to <Region Entrance Detection>.
4.
Check the <Enable> checkbox to enable this function.
5.
Click
to configure the <Trigger Channel>, <Arming Schedule> and <Linkage Actions> for the
<Line Crossing Detection Alarm>.
6.
Click the <Rule Settings> button to set the <Sensitivity> of the <Region Entrance Detection>.
<Sensitivity>:
Range [0-100]. The higher the value is, the more easily the <Detection Alarm> can be
triggered.
7.
Click
and draw a Quadrilateral in the preview window by specifying four vertexes of the
detection region and right click to complete the drawing. Only one region can be configured.
