38 ENGLISH
5.
After the GUID file is successfully imported, enter the reset password interface to set the new
admin password. Refer to Chapter 17.5.3.
6.
Click <OK> to set the new password. You can export the new GUID file to the U-flash disk for
future password resetting.
Note:
When the new password is set, the original GUID file will be invalid. The new GUID file should be
exported for future password resetting. You can also enter the User>User Management interface to edit
the Admin User and to export the GUID file.
2.2 Using the Wizard for Basic Configuration
By default, the Setup Wizard starts once the NVR has loaded, as shown below.
Start Wizard Interface
Operating the Setup Wizard:
Steps:
1.
The Setup Wizard can walk you through some important settings of the NVR. If you don’t want to
use the Setup Wizard at that moment, click the <Cancel> button. You can also choose to use the
Setup Wizard next time by leaving the <Start wizard when the device starts?> checkbox checked.
2.
Click the
<Next> button to enter the Date and Time Settings window, as shown below.
Date and Time Settings
