31 ENGLISH
2.
Getting Started
2.1 Recorder Startup
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
Before you start:
Check that the voltage of the extra power supply is the same as the NVR’s requirement and that the
ground connection is working properly.
Starting up the NVR:
Steps:
1.
Check that the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power indicator
LED on the front panel should be red, indicating that the device gets the power supply.
2.
Press the <POWER> button on the front panel. The Power indicator LED should turn blue, indicating
that the unit begins to start up.
3.
After startup, the Power indicator LED remains blue. A splash screen with the status of the HDD
appears on the monitor. The row of icons at the bottom of the screen shows the HDD status. ‘X’
means that the HDD is not installed or that it cannot be detected.
Shutting down the NVR:
There are two proper ways to shut down the NVR.
OPTION 1: Standard shutdown
Steps:
1.
Enter the Shutdown menu: Menu > Shutdown
Shutdown Menu
4.
Click the <Shutdown> button.
5.
Click the <Yes> button.
OPTION
2: By operating the front pane
