163 ENGLISH
4.
Leave the < UPnP>checkbox unchecked.
5.
Click to activate the <External Port Settings> dialog box. Configure the <External Port No.> for
the <Server Port>, the <HTTP Port>, the <RTSP Port> and the <HTTPS Port> respectively.
Note:
The value of the <RTSP Port No.> should be <554> or between <1024> and <65535> while the value of the
other ports should be between <1> and <65535> and the value must be different from each other. If multiple
devices are configured for the <UPnP™ Settings> under the same router, the value of the <Port No.> for each
device should be unique.
External Port Settings Dialog Box
6.
Click <OK> to save the setting for the <Current Port> and return to the upper-level menu.
7.
Click the <Apply> button to save the settings.
8.
Enter the <Virtual Server Settings> page of the router; fill in the blank of the <Internal Source Port>
with the <Internal Port Value> and the blank of <External Source Port> with the <External Port
Value> and other required contents.
Note:
Each item should be corresponding with the <Device Port> including the <Server Port>, the <HTTP Port>, the
<RTSP Port> and the <HTTPS Port>.
Setting Virtual Server Item
Note:
The above <Virtual Server Setting> interface is for reference only; it may be different due to different router
manufacturers. Please contact the manufacturer of the router if you have any problems with setting the
<Virtual Server>.
12.2.8 Configuring the Virtual Host
Please note:
This function is not available in all models (not supported by GD-RN-AT819128N).
You can directly get access to the <IP Camera Management> interface after enabling this function.
Note:
The <Virtual Host> function can only be configured through the web browser.
Steps:
