155 ENGLISH
6.
Click the <Apply> button to save and exit the interface.
Note:
Before setting the <SNMP>, please download the <SNMP> software and manage to receive the device
information via the <SNMP Port>. By setting the <Trap Address>, the NVR is allowed to send the <Alarm
Event> and an exception message to the surveillance center.
12.2.4 Configuring More Settings
Steps:
1.
Enter the <Network Settings> interface: Menu > Configuration > Network
2.
Select the <More Settings> tab to enter the <More Settings> interface.
More Settings Interface
3.
Configure the remote <Alarm Host>, <Server port>, <HTTP Port>, <Multicast> and <RTSP Port>.
<Alarm Host IP>/<Port>
: With a remote <Alarm Host> configured, the device will send the
<Alarm Event> or <Exception> message to the host when an alarm is triggered. The remote
<Alarm Host> must have the <SCMS (Client Management System)> software installed.
The
<Alarm Host IP>
refers to the <IP Address> of the remote PC on which the <SCMS (Client
Management System)> software is installed, and the <Alarm Host Port> must be the same as
the <Alarm Monitoring Port> configured in the software (default <Port> is <7200>).
<Multicast IP>
: The multicast can be configured to realize <Live View> for more than the
maximum number of cameras through the network. A <Multicast Address> spans the <Class-D
IP> range of <224.0.0.0> to <239.255.255.255>. It is recommended to use the <IP Address>
ranging from <239.252.0.0> to <239.255.255.255>.
When adding a device to the <SCMS (Client Management System)> software, the <Multicast
Address> must be the same as the device’s <Multicast IP>.
<RTSP Port>
: The <RTSP (Real Time Streaming Protocol>) is a network control protocol
designed for use in entertainment and communications systems to control streaming media
servers.
Enter the <RTSP Port> in the text field of
<RTSP Port>. The default <RTSP Port> is <554> and
you can change it according to different requirements.
<Server Port>
and
<HTTP Port>
: Enter the
<Server Port>
and the
<HTTP Port>
in the text fields.
The default <Server Port> is <8000> and the <HTTP Port> is <80> and you can change them
according to different requirements.
Note:
The Server Port should be set to the range of <2000> to <65535> and it is used for remote client
software access. The <HTTP Port> is used for remote <IE Access>.
