Furuno FAR-1416, Operator'S Manual

Page: 99 / 226

3. TARGET TRACKING (TT)
3-9
3.7 How to Display the Past Position
The past position display shows time-speed dots that mark the past positions of any
tracked targets. To change the target tracking interval, see paragraph 5.1.4.
3.7.1 How to display the past position
1. Open the [MAIN MENU].
2. Select [TRACK], then press the
left button .
3. Select [NEXT], then press the left button .
4. Select [OTHER TRACK SETTING], then press
the left button .
5. Select [TT TRACK DISPLAY], then press the left
button .
6. Select [ON], then press the left button .
To hide the track, select [OFF].
7. Close the menu.
3.7.2 How to change TT track color/line
You can select the color and line type for TT tracks.
1. Press the CURSOR ON/OFF key, when the cursor is not shown.
2. Move the cursor onto a desired target and press the TRACK COLOR key.
Track color window appears.
3. Select a color and a line from the menu.
4. Press the
right button to close the window.
3.7.3 How to set TT track interval
You can set the TT track interval.
1. Press the CURSOR ON/OFF key, when the cursor is not shown.
2. Move the cursor onto a desired target and press the PLOT INTVL key.
The selected target track is halted. The halted track is not recorded.
3. To reset the interval, move the cursor onto the halted target and press the PLOT
INTVL key.
[OTHER TRACK SETTING]
1. BACK
2. AIS TRACK DISPLAY
OFF/ON
3. DISPLAY TRACK DISPLAY
OFF/ON
4. TT TRACK DISPLAY
OFF/ON
5. GPS BUOY TRK DISPLAY
OFF/ON
6. OTHER TRK REC INTVL
TIME/RANGE
TIME REC. : 00m 05s
RANGE REC. : 0.10
7. OTHER CURR VCT DISP.
OFF/ON