Furuno FAR-1416, Operator'S Manual

Page: 33 / 226

1. OPERATIONAL OVERVIEW
1-19
Multi
Press the F1 key (or F2/F3/F4 key) to select the registered functions. The function
keys are preset as follows;
1. Press the F1 (or F2/F3/F4) knob.
The selecting menu appears.
2. Rotate the knob to select function desired.
3. Select a function with pressing the knob.
Repeat pressing the knob changes the menu.
1.13.3 Change the function key setting
To activate an assigned function, press the corre-
sponding function key (
F1 , F2 , F3 or F4 ).
You can change the function assigned to each key using the following procedure.
1. Open the [MAIN MENU].
2. Select [INITIAL SETTING], then press the
left button .
3. Select [FUNCTION KEY], then press the left button .
4. Select [F1], [F2], [F3] or [F4] as appropriate, then press the left button .
5. Referring to the table of available functions below, select a function category, then
left-click.
No.
Function key number
F1 F2 F3 F4
1 Chart display Orientation mode Custom menu TLL output
2 Nav aids Brill EAV MOB
3 Waypoint list CU-TM reset ES ACE high sens.
4 Route list TT list Video cnt -
5 Edit mark AIS list ACE -
6 - Consort list Target analyzer -
7 - BPS buoy list - -
8 - - - -
Function
category
Available function
ECHO PICTURE, RAIN/SEA/IR, ES, EAV, TARGET ANALIZER, HATCHING, NOISE
REJ, VIDEO ADJ, PULSE LENGTH, NEAR STC CURVE, LOW LEVEL ECHO,
ACE,TUNE SELECT, 2ND ECHO REJ, PM, SART, ECHO TRAIL, TRAIL T/R,
WIPER, ACE, TUNE INITIALIZE, TRAIL, 2ND ECHO REJ, SART/WIPER,
ECHO AREA, ZOOM, ZOOM AREA
TARGET (TT/
AIS) TT-LIST, AIS-LIST, CONSORT-LIST, GPS BUOY LIST, TARGET ACQ/SET-
TING, AIS PAST POSN, CONSORT DISPLAY, TT DISPLAY, GPS BOUY DIS-
PLAY, OTHERTRACK CLEAR, OTHER TRACK INTERVAL, OTHER TRACK
EDIT, CPA/TCPA, AZ1, AZ2, RESERVE MESSAGE
PLOTTER WPT LIST, ROUTE LIST, WPT MARK, SIMPLE DESTINATION, CHART, WPT
TIME, MARK SIZE, AUTO SHOT, MARK FILTER, MARK ALL DELETE, MARK
INFO, ORIGIN MARK, CHART POS, MOB, OWN TRACK DISP, OWN TRACK
ALL DELETE, TRACK EDIT, TRACK CHANGE ROUTE
OPERATION MEMORY, ZOOM, ORIENTATION, VECTOR TIME, VECTOR MODE, TRAIL
TIME, TRAIL MODE, ALARM1, ALARM2, ECHO COLOR, BRILL, TLL, DATA
BOX 1, DATA BOX 2, DATA BOX 3, SCREENSHOT
[F1 KEY EXECUTION]
1. CHART DISPLAY
2. NAV AID
3. WAYPOINT LIST
4. ROUTE LIST
5. EDIT MARK
6.
7.
8.