Furuno FAR-1416, Operator'S Manual

Page: 127 / 226

5. VIDEO PLOTTER OPERATION
5-11
5. Select the desired option, then press the left button .
1) Between two points: [BTWN 2PTS]
Select the start point and the terminal point on the track. The track line be-
tween the two points will be edited. Specify the color and line type, then press
the
left button to change.
2) Set range: [SET RNG]
Select start point and terminal point of the area to edit. Select a color and a line
type then select [RUN] and press the
left button .
3) Within range: [WITHIN RNG]
Select a color and a line type, then select [RUN] and press the left button . All
tracks displayed on the screen will be edited.
4) Out of range: [OUT OF RNG]
Select a color and a line type, then select [RUN] and press the left button . All
tracks not displayed on the screen will be edited.
6. Press the right button to close the menu.
5.1.10 How to display other ship’s information
You can display other ship’s information on the screen.
Basic information
1. Press the CURSOR DISP key when the cursor is not shown.
2. Place the cursor on the target whose information you want to view.
The information for the selected target appears. If there is no data, [- -] appears.
Note 1: If the target information is not shown, do the following procedure.
1) Open the [MAIN MENU].
2) Select [OTHER SHIP’S INFO.], then press the
left button .
3) Select [NEXT], then press the left button .
4) Select [TARGET CURSOR INFO.], then press the left button .
5) Select [ON], then press the left button .
6) Press MENU key to close menu.
Detailed information
1. Press the CURSOR DISP key when the cursor is not shown.
Target symbol
Cursor
Other ship’s
information
㻜㻝
Target number
NAME
䠖
FURUNO
LAT
䠖
351° 8.3085’ N
LON
䠖
135° 30.3529’ E
DIST
䠖
1.075NM
BRG
䠖
151.3°T