Furuno FAR-1416, Operator'S Manual

Page: 178 / 226

6. DATA SAVE AND READ
6-6
6.3.2 How to remove the USB flash memory
1. Open the [MAIN MENU].
2. Select [MEMORY REC./PLAY.], then press the
left button .
3. Select [REMOVE USB MEMORY], then press the left button .
The message shows to remove the USB flash memory.
4. Confirm the message, then press the left button .
5. Remove the USB flash memory.
6. Remount the cap to the USB port securely.
7. Close the menu.
6.3.3 How to save the data to USB flash memory
The following data is available to save to USB flash memory.
• Current data (own ship’s track, other ship’s track, mark/track, route/destination, set-
ting status)
• internal memory data (same as above)
1. Insert the USB flash memory to the USB port.
2. Open the [MAIN MENU].
3. Select [MEMORY REC./PLAY.], then press the
left button .
CAUTION
To remove the USB flash memory, do
the following procedure.
Wrong operation may cause to damage
the USB flash memory.