manualshive.com logo in svg

Furuno FAR-1416, Operator'S Manual

Share
Download
Furuno FAR-1416 Operator'S Manual Download Page 185

6.  DATA SAVE AND READ

6-13

6.6

Screenshot

This system has a screen capture function. The screenshot data is saved in the inter-
nal memory (100 pictures max.). The captured data should be transfered to an USB 
flash memory to browse as follows:

1. Press the 

CURSOR ON/OFF

 key if a cursor is not shown.

2. Move the cursor onto the screenshot icon (

).

The screenshot function is activated and the operation guide appears.

Note: 

While another function menu is activated, the screenshot is disable. Set up 

the screenshot function to a function key, then you can use the screenshot while 
the other function is used. Refer to section 1.13.

3. Press the 

left button

 to save the screenshot to internal memory.

The message “SAVED SCREENSHOT” appears.

Note: 

Do not operate the keys before the message disappears.

4. Connect a USB flash memory in the USB drive.
5. Move the cursor onto the screenshot icon.
6. Press the 

right button

 to show the operation menu.

7. Press the 

left button

 to save the data onto the USB flash memory.

The message box appears. Select [RUN] to transfer the data to memory.

All data are stored to the folder ‘FAR-14x6\screenshot\User’ in the USB flash 
memory.

8. Press the 

right button

 to close the menu.

9. Remove the USB flash memory.

Note: 

Refer to paragraph 6.3.2.

Note: 

To erase the screenshot data from internal memory, select the files on the list 

of screenshots and press the 

CANCEL

 key.

  SCREENSHOT

 NO.OF SCREENSHOTS  3/100

TURN WHEEL : SELECT  PRESS RIGHT BUTTON : CLOSE
PRESS LEFT BUTTON :  COPY TO USB MEMORY  [CANSEL]: DELETE
[MARK SELECT]: PREVIOUS PAGE    [MARK]: NEXT PAGE

SEL PAGE_    1/1

SELECT FILE

2017-10-12_005010009.png

2017-10-12_005006018.png
2017-10-11_005006015.png

CANCEL

RUN

OVERWRITE CURRENT SCREENSHOT 
DATA TO USB MEMORY.
ARE YOU SURE?

Summary of Contents for FAR-1416



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands