1. OPERATIONAL OVERVIEW
1-47
1.35.5
Trail level
The level, or intensity, of the afterglow that extends from radar targets can be selected
as below.
1. Select the [TRAIL] box at the bottom-right corner of the screen, then press the
right button
to display the [TRAIL MENU].
2. Select [TRAIL LEVEL], then press the
left button
.
3. Select the appropriate setting, then press the
left button
. The higher the number,
the greater the intensity of the afterglow.
4. Close the menu.
1.35.6
Narrow trails
Target trails can be painted with thinner lines if desired. This can be useful when there
are a lot of targets on the screen and it is hard to distinguish one from another.
1. Select the [TRAIL] box at the bottom-right corner of the screen, then press the
right button
to display the [TRAIL MENU].
2. Select [NARROW TRAIL], then press the
left button
.
3. Select the appropriate setting from [OFF], [1] or [2], then press the
left button
. [2]
is thinner than [1].
4. Close the menu.
1.35.7
How to hide the trails temporarily
Following the procedure outlined in "Trail time" on page 1-44, set the trail time to
[OFF]. The trails are hidden from view, but are continued. To show the trails again,
repeat the procedure, setting the trail time to any interval other than [OFF].
1.35.8
How to erase/restart trails
Erase all trails
All trails can be erased (including those in the memory) and restarted to start fresh
trails.
To erase trails, select the [TRAIL] box, then press and hold the
left button
. You can
also press and hold
TGT TRAIL
key to erase trails.
Erase the part of trail
1. Press the
CURSOR ON/OFF
key when the cursor is not shown.
2. Rotate the
scrollwheel
to select [TRAIL ERASER SELECT].
3. Press the
left button
to select the eraser size.
4. Erase the trail lines by following operations.
• Erase the partial points: Move the cursor on the trail, then press and hold the
left button
.
The points inside of the circle are deleted.
• Erase the wide area points: Press and hold the
left button
and move the cursor
with
trackball
on the trail.
The circle overlapping points are deleted.
Summary of Contents for FAR-1416
