manualshive.com logo in svg

Furuno FAR-1416, Operator'S Manual

Share
Download
Furuno FAR-1416 Operator'S Manual Download Page 157

5.  VIDEO PLOTTER OPERATION

5-41

9. To complete creating the route, press the 

left button

 twice at the destination 

point.
A light blue line will be drawn between the own ship and the first waypoint and 
green line will be drawn for the rest of route. These lines show the shortest dis-
tance to each waypoint and arrow marks on the line show the direction of route. 
The distance, bearing and TTG (factory default) will be displayed on the upper 
area of the screen. The quick route is saved to the route list with a name of 
“Q<RTE”.

Note: 

The older quick route will be deleted after a new one is registered. 

“QP<001” will be deleted from the quick route when a new waypoint is set.

5.6.2

How to set the registered waypoint as a destination

There are four methods to set the registered waypoint as a destination.

•  Select the waypoint on the display
•  Select the waypoint from the [WAYPOINT LIST]
•  Select the waypoint by entering the waypoint name (for the numeral name only)
•  Select the waypoint from the log list.

Note: 

The following procedures can be operated only when the setting of [ROUTE SE-

LECT] is set as [IN].

How to select the waypoint on the display

1. Press the 

MENU

 key to open the [MAIN MENU].

2. Select [ROUTES/WAYPOINTS], then press the 

left button

.

3. Select [SET GOTO METHOD], then press the 

left button

.

4. Select [ONE POINT], then press the 

left button

. (Refer to "How to select the set-

ting method of quick points" on page 5-38).

5. Press the 

CURSOR ON/OFF

 key if the cursor is not shown.

6. Press the 

GO TO

 key.

A light blue line will be drawn between own ship and a waypoint. The distance, 
bearing and TTG (factory default) will be displayed on the upper side of display 
unit.

How to select the waypoint from the waypoint list

1. Press the 

MENU

 key to open the [MAIN MENU].

2. Select [ROUTES/WAYPOINTS], then press the 

left button

.

3. Select [WAYPOINT LIST], then press the 

left button

.

4. Select the waypoint to set as a destination from the list, then press 

GO TO

 key.

[GOTO: WAYPOINT xxxxx] will be displayed below the window title [WAYPOINTS 
LIST]. A light blue line will be drawn between own ship and a waypoint. The dis-
tance, bearing and TTG (factory default) will be displayed on the upper side of dis-
play unit.

5. Press the 

right button

 to close the menu.

How to select the waypoint by entering the waypoint name

1. Press the 

CURSOR ON/OFF

 key if the cursor is not shown.

Summary of Contents for FAR-1416



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands