Furuno FAR-1416 Operator'S Manual Download

Page: 95 / 226

3. TARGET TRACKING (TT)

3-5

3.5

Display Settings for Target Numbers

The mark shape, mark color and track color can be selected for tracked targets num-
ber 1 to 10. The table below shows the default shapes and colors.

Confirm the settings

1. Press the

CURSOR ON/OFF

key, if the cursor is not shown.

2. Move the cursor onto the symbol desired.
3. Rotate the

scrollwheel

to select preset number.

Register the TT symbol desired

1. Press the

CURSOR ON/OFF

key, if the cursor is not shown.

2. Move the cursor onto the TT symbol desired.
3. Rotate the

scrollwheel

to show the setting.

The preset number is changed from 1 to 10 as wheel rotation. The target vector
color is set by the symbol color.
• Symbol color is white: Vector color is light-blue.
• Symbol color is not white: Vector color is white.

How to set the TT symbol

1. Open the [MAIN MENU].
2. Select [OTHER SHIPS’ INFO.], then press the

left button

3. Select [TT], then press the

left button

No.

Mark Color

Shape

Track color

Target name

Red

Yellow

Green

Light-blue

Purple

Blue

White

Summary of Contents for FAR-1416



































































































































































































































Search results

Summary of Contents for FAR-1416

Reviews:

Related manuals for FAR-1416

Brands by name

Popular brands

Furuno FAR-1416, Operator'S Manual

Search results

Summary of Contents for FAR-1416

Reviews:

Related manuals for FAR-1416

Brands by name

Popular brands