Furuno FAR-1416, Operator'S Manual

Page: 106 / 226

3. TARGET TRACKING (TT)
3-16
Note: If own ship moves after the start of simulation mode, the movement of the sim-
ulated target is not matched with the values in the following table.
Place the cursor on a target, then press the left button
to display the target data.
Acquire the simulated targets after the TT simulation
mode is performed. The tracking state changes from
unstable to stable and the vector appears. You can
simulate the movement of each function with changing
true/relative vector, stabilization through the water/over
the ground, range or length of vector.
Repeat the check for all targets.
Range (R) Bearing (R) Speed (R) Course (R) CPA TCPA
Target 01 9.5 NM 270.0° 20.0 kn 90.0° 0.0 NM 28.5 min
Target 02 1.1 NM 333.0° 10.2 kn 90.2° 1.0 NM 2.9 min
Target 03 9.3 NM 45.0° 19.9 kn 225.1° 0.0 NM 28.0 min
S
01
03
02