Furuno FAR-1416, Operator'S Manual

Page: 124 / 226

5. VIDEO PLOTTER OPERATION
5-8
3. While the target information is displayed, press the TRACK COLOR key.
The [CHANGE TRACK COLOR] window appears.
4. Select [LINE TYPE], then press the left button .
5. Select the preferred line type, then press the left button .
6. Press the right button to close the window.
5.1.7 How to set the track recording method and interval
You can record the track of your ship or an other ship. The data recording is by range
interval or time interval.
Change the recording method for own ship’s track
To change the recording method for own ship's track, press the PLOT INTVL key. The
plotting method changes in the following order: [TRACK INTERVAL 1]
o
[TRACK IN-
TERVAL 2]
o
[HALT]
o
[TRACK INTERVAL 1]…
To set the [TRACK INTERVAL 1/2], refer to following procedure.
Change the recording interval for own ship’s track
1. Open the [MAIN MENU].
2. Select [TRACK], then press the
left button .
3. Select [OWN TRACK SETTINGS], then press left button .
4. Select [TRACK INTERVAL 1] or [TRACK INTERVAL 2], then press the left but-
ton .
5. Select [TIME] or [RANGE], then press left button .
6. Rotate the scrollwheel to set the time interval or range interval, then press the
left button .
Setting ranges are as follows.Time interval: 0 seconds to 59 minutes 59 sec-
onds.Range interval: 0 NM to 9.99 NM.
7. Press the MENU key to close the menu.
Change the recording interval for other ship’s track
1. Open the [MAIN MENU].
2. Select [TRACK], then press the
left button .
3. Select [NEXT], then press the left button .
4. Select [OTHER TRACK SETTINGS], then press left button .
5. Select [OTHER TRACK REC INTVL], then press the left button .
6. Select [TIME] or [RANGE], then press left button .
SHIP’S NAME (FURUNO)