Furuno FAR-1416 Operator'S Manual Download

Page: 49 / 226

1. OPERATIONAL OVERVIEW

1-35

1.29.2

How to edit a customized echo

1. Select a customize echo option to edit (see paragraph 1.29.1).
2. Select the [CUSTOMIZE ECHO] box, then press the

right button

to display the

[CUSTOMIZE ECHO] menu.

3. Set the items below referring to the sections shown.

The editing icon appears when the settings are changed.

4. Select [NEXT], then press the

left button

to open

the [CUSTOM ECHO MENU 2/2]

5. Select [VIDEO CONTRAST TYPE], then press the

left button

The cursor moves to numeral.

6. Select [1], [2], [3] or [4] (Dynamic Range) or [A], [B],

[C] (Curve) as appropriate then press the

left but-

ton

. Refer to the description and illustration below.

1-4

: Control dynamic range. 1 provides the widest dynamic range; 4 is the narrow-

est dynamic range.

: Low level echo brilliance is reduced and noise and clutter are also reduced.

: Low and high level echoes are displayed evenly.

: High level echoes' outer edge has gradation to indicate the echo level, with the

higher level echo at the core.

7. Select [CONDITION], then press the

left button

8. Select [NEAR STC CURVE], then press the

left button

9. Select the appropriate setting for the current sea conditions, then press the

left

button

. The available settings are: [2], [2.5], [3], [3.5], [4.2]. A higher setting is rec-

ommended for rough weather.

10. Select [STC ANT HEIGHT], then press the

left button

11. Select the radar antenna height (above the waterline), then press the

left button

12. If necessary, select [LOW LEVEL ECHO] to reject low level echoes. The setting

range is [0] to [8]. The higher the figure, the stronger the low level echo that is
erased.

13. To save custom settings, select [SAVE] from [DEFAULT], then press the

left but-

ton

14. Close the menu.

• [INT REJECT]

• [HATCHING]

• [ECHO STRETCH]

• [NOISE REJECT]

• [ECHO AVERAGE]

• [PULSE]

• [TARGET ANALYZER]

• [ACE]

[CUSTOM ECHO MENU 2/2]

1. BACK
2. VIDEO

CONTRAST

TYPE

1/2/3/4
A/B/C
3. [CONDITION]
4. DEFAULT
NO/SAVE/USER/FACTORY

CONTRAST

LEVEL

CONTRAST

LEVEL

CONTRAST

LEVEL

CONTRAST

LEVEL

Summary of Contents for FAR-1416



































































































































































































































Search results

Summary of Contents for FAR-1416

Reviews:

Related manuals for FAR-1416

Brands by name

Popular brands

Furuno FAR-1416, Operator'S Manual

Search results

Summary of Contents for FAR-1416

Reviews:

Related manuals for FAR-1416

Brands by name

Popular brands