Furuno FAR-1416, Operator'S Manual

Page: 152 / 226

5. VIDEO PLOTTER OPERATION
5-36
10. Press the left button .
The following confirmation message appears.
11. Select [RUN], then press the left button .
12. Close the menu.
5.5.2 How to edit created routes
How to add a waypoint into the route
You can add new waypoints to a registered route.
Note: This function is enabled when [ROUTE SELECT] is set to [IN] on [ROUTE/
WAYPOINT] menu.
1. Open the [MAIN MENU].
2. Select [ROUTES/WAYPOINTS], then press the
left button .
3. Select [ROUTE LIST], then press the left button .
4. Select a route to insert waypoints, then press the left button .
The [ROUTE NAME/ENTER COMMENT] window appears.
5. Select [RUN], then press the left button .
The [ROUTE TURN POINTS LIST] appears.
6. Select the location (waypoint) from the list, then press the left button .
The cursor moves to [WAYPOINTS LIST]. A new waypoint will be inserted on pre-
vious row.
7. Select a waypoint from [WAYPOINTS LIST], then press the left button .
The new waypoint is entered above (before) the selected waypoint.
Note: If you make a wrong selection, press the right button to go back the
[ROUTE TURN POINTS LIST] and select the waypoint to delete, then press the
CANCEL key.
8. Close the menu.
How to delete a waypoint from the route
Note: This function is enabled when [ROUTE SELECT] is set to [IN] on [ROUTE/
WAYPOINT] menu.
1. Open the [MAIN MENU].
2. Select [ROUTES/WAYPOINTS], then press the
left button .
3. Select [ROUTE LIST], then press the left button .
4. Select a route to delete a waypoint, then press the left button .
The [ROUTE NAME/ENTER COMMENT] window appears.
5. Select [RUN], then press the left button .
The [ROUTE TURN POINTS LIST] window appears.
6. Select a waypoint to delete, then press the CANCEL key.
The waypoint will be deleted.
7. Close the menu.
START CONVERSION.
ARE YOU SURE?
RUN CANCEL