Furuno FAR-1416, Operator'S Manual

Page: 175 / 226

6. DATA SAVE AND READ
6-3
3. Select [DISPLAY INT. MEMORY], then press the left button .
[DISPLAY INTERNAL MEMORY] window appears. Press the MARK SELECT
key or the MARK key to select the page number from 1 to 3 pages.
4. Select [YES], then press the left button .
The current data is displayed on the screen. To cancel the display, select [NO] and
press the
left button .
5. Repeat the step 4 and 5 for other data indication.
6. Close the menu.
To erase the indication, select [NO] at step 5.
6.2.3 How to playback the internal memory data
You can playback the internal memory data. However, this playback operation deletes
the present data on active memory. If you need the present registered data, backup
the active memory data to internal memory.
1. Press the STBY/TX key to change to st-by mode.
The following procedures are enable at TX mode.
2. Open the [MAIN MENU].
3. Select [MEMORY REC./PLAY.], then press the
left button .
DISPLAY INTERNAL MEMORY
INTERNAL MEMORY 1
ADD OWN TRACK DISP
ADD OTHER TRCK DISP
ADD MARK/LINE DISP
INTERNAL MEMORY 2
ADD OWN TRACK DISP
ADD OTHER TRCK DISP
ADD MARK/LINE DISP
INTERNAL MEMORY 3
ADD OWN TRACK DISP
ADD OTHER TRCK DISP
ADD MARK/LINE DISP
INTERNAL MEMORY 4
ADD OWN TRACK DISP
ADD OTHER TRCK DISP
ADD MARK/LINE DISP
: YES NO 0/30000
: YES NO 0/40000
: YES NO 3/30000
: YES NO 0/30000
: YES NO 0/40000
: YES NO 3/30000
: YES NO 0/30000
: YES NO 0/40000
: YES NO 3/30000
: YES NO 0/30000
: YES NO 0/40000
: YES NO 3/30000
: 0 /30000
: 0 /10000
: 0 /10000
: 0 /10000
: 0 /10000
: 0 /30000
OWN TRK
OTHER TRK (CONS)
(AIS)
(TT)
(GPS
BUOY)
MARK/LINE
TTL ADD DISP
[MARK SELECT] : PREVIOUS PAGE [MARK] : NEXT PAGE
TURN WHEEL : SELECT PRESS LEFT BUTTON : ENTER
PRESS RIGHT BUTTON : CLOSE
SEL PAGE _ 1/3