Furuno FAR-1416, Operator'S Manual

Page: 166 / 226

5. VIDEO PLOTTER OPERATION
5-50
1. Press the MENU key to open the [MAIN
MENU].
2. Select [ALERT SETTINGS], then press the
left button .
3. Select [W-TMP./TIDE/DEPTH], then press the
left button .
4. Select [WATER TMP. ALERT], then press the
left button .
5. Select [INNER] or [OUTSIDE], then press the
left button .
Cursor moves to the value of [LOWEST TMP.].
6. Rotate the scrollwheel to set the lowest tem-
perature, then press the left button.
Cursor moves to the value of [HIGHEST
TMP.].
7. Rotate the scrollwheel to set the highest temperature, then press the left button .
8. Close the menu.
To deactivate either alert, select [OFF] at step 5.
5.7.8 How to set the tide alert
The tide alert sounds when the water temperature goes higher or lower than the preset
value within the interval time set.
Note: The tide alert requires a water temperature sensor.
1. Press the MENU key to open the [MAIN MENU].
2. Select [ALERT SETTINGS], then press the left button .
3. Select [W-TMP./TIDE/DEPTH], then press the left button .
4. Select [TIDE ALERT], then press the left button .
5. Select [ON], then press the left button .
Cursor moves to the value of [VARIATION TMP.].
6. Move the scrollwheel and set the temperature variation, then press the left but-
ton.
Cursor moves to the value of [DETECTION TIME].
7. Move the scrollwheel and set the detection time, then press the left button .
8. Close the menu.
To deactivate either alert, select [OFF] at step 5.
5.7.9 How to set the depth alert
The depth alarm sounds when the bottom echo is within the alarm range set.
Note: The depth alarm requires a water depth data.
1. Press the MENU key to open the [MAIN MENU].
2. Select [ALERT SETTINGS], then press the left button .
3. Select [W-TMP./TIDE/DEPTH], then press the left button .
4. Select [DEPTH ALERT], then press the left button .
[W-TMP./TIDE/DEPTH]
1. BACK
2. WATER TMP. ALERT
OFF/INNER/OUTSIDE
LOWEST TMP. : +00.0°C
HIGHEST TMP. : +30.0°C
3. TIDE ALERT
OFF/ON
VARIATION TMP. : 0.1°C
DETECTION TIME: 010SEC
4. DEPTH ALERT
OFF/ON
START DEPTH : 0000.0m
DEPTH WIDTH : 00.0m