Furuno FAR-1416, Operator'S Manual

Page: 132 / 226

5. VIDEO PLOTTER OPERATION
5-16
4. Press the left button or MARK key to enter the second mark.
The relative distance and heading data appears near by cursor.
5. Repeat step 7 and 8 to enter the marks.
6. Press the right button to exit the mark function.
Note 1: This function is invalid after ten seconds of no operation.
Note 2: The cursor information display function is invalid while this relative loca-
tion information is used. When the mark entering is finished, the cursor informa-
tion display can be used.
Enter a mark onto the location at specified L/L
1. Open the [MAIN MENU].
2. Select [MARK], then press the
left button .
3. Select [INPUT MARK], then press the left button .
The mark input window appears.
4. Select [LATITUDE], then press the left button .
5. Rotate the scrollwheel to set the location by latitude, then press the left button .
Rotate the scrollwheel to toggle between N (North) and S (South).
6. Select [LONGITUDE], then press the left button .
7. Rotate the scrollwheel to set the location by longitude, then press the left button .
Rotate the scrollwheel to toggle between E (East) and W (West).
8. Select the mark color, shape, line type and fish type as outlined in
paragraph 5.2.1.
9. Select [RUN], then press the left button .
10. Press the right button to close the window.
1.156NM
77.6°R
Range and
bearing from
the start point
Start point (Mark)
Setting line type
Cursor
Start point (Mark)
RUN
INPUT MARK
LATITUDE : 34° 44.0000’ N
LONGITUDE : 135° 21.0000’ E