FR200 Series Vector control inverter
- 33 -
Fig.3-7(f) Disassemble and installation of the cover
g. Stringing board disassembly and installation
：
Disassemble board first when stringing wire
，
When
connected input and output cables, the Stringing board clicks into place. Referring to fig 3-7(g)
Fig.3-7(g) Stringing board disassembly and installation
3.5 Dust cover installation and removal
（
Optional accessories
）
a. Install dust cover
：
The dust cover shown in Fig3-8 parallel to the housing assembly
（
No cock
around is installed
）
.
b. Removing dust cover
：
cording to the dust cover arrow direction, at one end of the dust cover
and hard to lift the dust cover under the desirable.
Fig.3-8 Dust cover installation and removal
Screw
