FR200 Series Vector control inverter
- 30 -
Hex nuts
Place the hex
nut groove
Mounting Bracket
M5 screw
Through the corner four
M5 screw fastening machines
Mounting panel
The machine Components
Hole B Hole B
Hole B
Hole B
Fig.3-6 (a)0.75
～
15kW Wall installation
Mounting panel
The machine Components
Installation hanging feet
Fig.3-6 (b)18.5
～
132kW Wall installation
Do not take the sunken screws as shown in the
picture. Otherwise, inverter may be damaged
Take screws combined with springs and plain gaskets to
Install inverter.
3.4 Remove & Mount Keypad and Cover
a. Remove keypad: Disassemble keypad. See following Figure: Push the buckle on the
keypad in
Direction 1 first, and then lift up the keypad in Direction 2.
