FR200 Series Vector control inverter
- 32 -
Fig.3-7(d) Open cover
e. Assemble keypad: See following Figure: Place the upper buckle of the terminal cover in the slot of
upper housing in Direction 1, and then press the two lower buckle of terminal cover I Direction 2 until it
clicks into right place of upper housing. , then Tighten the screws as shown in Fig.3-7
（
e
）
Fig.3-7(e) Mount covers
f. Removing and installing the cover method as shown in fig 3-7(f)
：
First, loosen the screws Then
open the cover up. According to the assembly when the shell shown method to be assembled in place,
and then tighten the screws.
Screw
Screw
2
1
